Huron Speed CTS-V V2 Twin Turbo Kit – Base

$4,299.00

Add Comp Air-Cooled Turbos

No Oil OR Coolant lines needed, no lines to Turbos at all!

Add Comp Journal Bearing Turbos

REQUIRES Oiling to be ran to and from turbos, can add on oiling system below or run your own.

Add Precision Turbos

REQUIRES Oiling to be ran to and from turbos, can add on oiling system below or run your own.

Add Wastegates

Add BOV

Add Exhaust

Add Intake Manifold

Holley Sniper standard height intake manifold as shown in our photos – Polished or Black available. For use with your OEM Throttle Body. Includes Fuel Rails!

Add Injectors

Add Dual Fuel Pump System

Add Huron Speed Low Mount TT Turbo Oiling System

Includes -4 feed lines, -10 return lines, Oil flanges, -10 fill cap fitting, all fittings, check valves for the feed as well as return, Turbowerx EXA Pump, Plug and Play harness for the pump. Assembly required and mounting of the pump.

Add Huron Speed Boost/Vacuum Reference Kit

Includes Huron Speed CNC Billet Boost/Vacuum block that install in-line of the brake booster hose, all fittings, roll of 1/4″ vacuum hose and clamps

Shipping to

SKU: ctsv2tt Category:

Description

Huron Speed CTS-V V2 Twin Turbo Kit

*New Version of the kit now available!*

*Please contact for lead times prior to ordering, currently a few weeks*

 

Kit Features:

*Fits V-band .82 or 1.06 inlet Turbos ranging from Billet 5858s up to Billet 6871s. This allows us to supply a very quick spooling set-up on a factory engine, up to 1300+ RWHP  capability!

*Full 3″ Stainless Steel Downpipes are standard, sending the exhaust back into the tunnel for easy additional exhaust attachment 

*Air filters off each turbo allows them to properly breath while safe for daily driving use, even in the rain!

*Retains all OEM accessories in their OEM Locations

*Requires NO drilling/tapping for the oiling! Recommend  Comp Air-cooled turbos for extremely easy installation and zero hassles of oiling issues or running of lines.

*Extra strong .120 wall stainless tubular V-band manifolds that come backed by a LIFETIME warranty as with the rest of the piping!

*Large 4.5″ Thick Air 2 Air Black Series Intercooler w/ air-guides to support 1300+hp

*Includes a bumper support bar that wraps around the front of the intercooler for added production as well as mounts to retain the OEM Transmission cooler!

*Includes a new set of Stainless Steel extremely strong chassis braces to replace the originals on the car allowing for more room to fit the turbo system!

*Back by the Huron Speed Lifetime Warranty (see details on our home-page)

 

Included Components:

*Stainless extra thick .120 wall Tubular V-band inlet Turbo Manifolds w/ 44-46mm WG flanges 

*Stainless Steel 3″ Downpipes that recirculate the wastegates for that clean turbo noise!

*Polished Stainless 2″ Cold Side Piping up to the Intercooler

*Polished Aluminum 3.5″ Cold-Side Piping into Throttle Body w/ 50mm BOV flange and OEM MAF sensor flange.

*Large 4.5″ Air 2 Air Black Series Intercooler w/ Air guides

*Strong Steel front bumper support bar that wraps around the front of the intercooler for added protection and mounts of the OEM Transmission cooler.

*Extra strong Stainless Steel chassis braces to replace the OEM braces and mount the cold-side tubes securely.

*All required silicone couplers and T-bolt clamps

*Air Filters for both Turbo Inlets

*All required Grade-8 Hardware

 

**Options now available direct from Huron Speed with your kit:

-Full 3″ Muffler-less exhaust exiting the rear w/tips for Coupe, Sedan, and Wagon for $749

-Turbochargers from Comp Turbo or Precision Turbo

-Wastegates from Huron Speed, Precision Turbo or Turbosmart

-BOV from Huron Speed, Precision Turbo or Turbosmart

-Holley Intake manifold options

-Oiling system if choosing to run oiled turbos including Exa pump, -4 feed lines, -10 return lines, fittings, flanges, check valves, oil cap fitting, and harness for the Exa pump.

-Boost/Vacuum Line setup with Huron Speed CNC log, fittings, 1/4″ Vacuum hose and clamps

-Fueling upgrades from Fore Innovations, Squash Performance, FIC Injectors, Injector Dynamics

 

**Requires: Turbochargers, Wastegates, BOVs, Fueling Upgrades, Tuning, removal of your factory Supercharger and replacing with LS3 style Intake Manifold & Throttle Body

 

 

Item is for OFF-ROAD use ONLY.