Huron Speed V3 T6 Hot-Side
*Please allow a couple weeks for shipment. Please contact prior to purchasing for more accurate lead time.
Hotside Only Kit Information:
*Our new V3 Stainless Steel, Vbanded, extra thick .120 wall Manifolds that retain the OEM Alternator location
* 2.25” extra thick .120 wall Stainless Divided Crossover, V-banded allows for easier installation with a 44-46mm V-banded Wastegate port in each bank directly in the line of exhaust flow, primary O2 sensor bungs, into a thick, stainless, divided T6 flange. All piping stays ABOVE the oem sway bar!
* Single 4″ Stainless passenger side front bumper exit downpipe or Optional 5″ upgrade will supply the exhaust flow needed for 1500hp. Wideband O2 bung and plug welded in. New Design allows much better clearance out the bumper and to other tubing. Downpipes are S400 Flanged
* Turbo support bracket bolts to the oil drain of the turbo and to the oem alternator bracket mount location. Hook up on the support allows for easy access of hooking up your oil drain line.
*All necessary V-band clamps included in this kit. Entire hotside consists of all v-band connections
*Grade 8 Bolt/Hardware Kit included for Turbo and Manifold Mounting.
*Kit requires: Dual pass style stood up radiator with coolant hoses and fans to clear piping/turbo. A/C removal. Relocation of the overflow tank to fit the large downpipe out the bumper. Requires Cold-Side, turbos, wastegates, BOVs, and Oil lines as well to complete (all of which we can supply)
*Kit built around a S400 T6 Turbo. Plently of clearance when using a standard compressor cover to the power steering and ABS. When using the new larger V2 Race-Cover we recommend removing the power steering and ABS. It can be retained with some small modification but it is tight with this large race-cover. Due to the large exit out the bumper, depending on model of car you can expect to lose your marker light on the passenger side.
*Kit RETAINS: OEM Alternator location, OEM Front Sway bar
*Cold-side shown in some pictures above NOT included.
Any questions, please e-mail direct to: firstname.lastname@example.org