Huron Speed V3 T6 Hot-side Kit

 Huron Speed V3 T6 Hot-Side

Hotside Only Kit Information:

* 2.25” extra thick wall Stainless Divided Crossover, Truck manifold flanged with a 44-46mm V-banded Wastegate port in each bank directly in the line of exhaust flow, primary O2 sensor bungs, into a thick, stainless, divided T6 flange. All piping stays ABOVE the oem sway bar!

* Single 4″ Stainless passenger side front bumper exit dp or Optional 5″ upgrade will supply the exhaust flow needed for 1500hp. Wideband O2 bung and plug welded in. New Design allows much better clearance out the bumper and to other tubing. Dp’s are S400 Flanged

* Turbo support bracket bolts to the oil drain of the turbo and to the oem alternator bracket mount location. Hook up on the support allows for easy access of hooking up your oil drain line.

*All necessary V-band clamps included in this kit. Entire hotside consists of all v-band connections

*Grade 8 Bolt/Hardware Kit included for Turbo and Manifold Mounting.

**Piping kit only, requires other items noted to run, vehicle will not run without these outside sourced items completed by you, therefore sold as show only.

*Kit requires: Dual pass style stood up radiator with coolant hoses and fans to clear piping/turbo. A/C removal. Relocation of the overflow tank to fit the large downpipe out the bumper. Requires Cold-Side, turbos, wastegates, BOVs, and Oil lines as well to complete (all of which we can supply)

*If running a Race-Cover option on your turbo from VSRacing or the V2 Race Cover from Forced Inductions, we recommend removing your Power Steering and ABS. They can be retained with this kit using a standard S400 compressor cover or the Compact Race Cover from Forced Inductions.

*Due to the large exit out the bumper, depending on model of car you can expect to lose your marker light on the passenger side.

*Kit RETAINS: OEM Alternator location, OEM Front Sway bar

*Cold-side NOT included.

Any questions, please e-mail direct to: huronspeedproducts@gmail.com